SciRisq

The science of making better risk decisions.

Info Center

  1. Fluid Mechanics
  2. Combustion
  3. Aerodynamics
  4. Risk Analysis
  5. Thermal Analysis
  6. Gas Dispersion
  7. Heterogeneous Explosives
  8. Structural Damage
  9. Homemade Explosives
  10. IEDs
  11. EOD Operations

Clutter, J.K., “Application of Computational Modeling for Explosive Hazard Assessments”,” submitted to International Journal of Protective Structures, Mar 2013.

Parihar, A., Vergara, C., and Clutter, J.K. “Methodology for Consequence Analysis of LNG Releases at Deepwater Port Facilities,” Safety Science, Vol. 49, No. 5, June 2011, pp. 686-694.

Connolly, T.J.M. and Clutter, J.K. “Criteria to Determine Likelihood of Brain Injury During Explosive Events,” Safety Science, Vol. 48, No. 10, Dec 2010, pp. 1387-1392.

Stoltz, E., Clutter, J.K., and Hudson, F., “Modeling Property Value Loss in a City Due to Terrorist Bombings,” IEEE Systems Journal, Vol. 3, No. 2, June 2009, pp. 221-230.

Mathis, J.T. and Clutter, J.K. “Evaluation of Orientation and Environmental Factors on the Blast Hazards to Bomb Suit Wearers,” Applied Ergonomics, Vol. 38, No. 5, Sept. 2007, pp. 567-579.

Clutter, J.K., Mathis, J.T., and Stahl, M.W., “Modeling Environmental Effects in the Simulation of Explosion Events,” Int. Journal of Impact Engineering, Vol. 34, No. 5, May 2007, pp. 973-989.

Versteeg, S.K. and Clutter, J.K. “Computational Study of Burgers’ Original Model of Turbulence,” AIAA Journal, Vol. 43, No. 7, July 2005, pp. 1624-1625.

Clutter, J.K., and Stahl, M.W., “Hydrocode Simulations of Air and Water Shocks for Facility Vulnerability Assessments,” Journal of Hazardous Material, Vol. 106, No. 1,2, Jan 2004, pp. 9-24.

Clutter, J.K. and Belk, D.M., “Simulation of detonation wave interaction using an ignition and growth model,” Shock Waves, Vol 3, No. 3, Nov 2002, pp. 251-263.

Clutter, J.K., and Mathis, J., “Computational modeling of vapor cloud explosions in off-shore rigs using a flame-speed based combustion model,” Journal of Loss Prevention in the Process Industries, Vol. 15, Issue 5, September 2002, pp. 391-401

Hudson, M.K., Luchini, C., Clutter, J.K., and Shyy, W., “The Evaluation of Computational Fluid Dynamics Methods for Design of Muzzle Blast Suppressors for Firearms,” Propellants, Explosives, Pyrotechnics, Vol. 26, 2001, pp. 201-208.

Clutter, J.K., and Whitney, M., “Use of Computational Modeling to Identify the Cause of Vapor Cloud Explosion Incidents,” Journal of Loss Prevention in the Process Industries, Vol. 14, Issue 5, Oct 2001, pp. 337-347.

Clutter, J.K., “A Reduced Combustion Model for Vapor Cloud Explosions Validated Against Full-Scale Data,” Journal of Loss Prevention in the Process Industries, Vol. 14, Issue 3, Feb 2001, pp. 181-192.

Clutter, J.K., Mikolaitis, D.W., and Shyy, W., “Reaction Mechanism Requirements in on Shock-Induced Combustion Simulations,” Proceedings of the Combustion Institute, Vol. 28, pp. 663-669, Twenty-Eighth International Symposium On Combustion, University of Edinburgh, Scotland, July, 2000, ISSN 0082-0784.

Clutter, J.K., and Luckritz, R.T. “Comparison of a Reduced Explosion Model to Blast Curve and Experimental Data,” Journal of Hazardous Materials, Vol. 79, Oct 2000, pp. 41-61.

Clutter, J.K., and Luckritz, R.T. “Comparison of Blast Curve and a Reduced Explosion Model to Experimental Results,” International Conference and Workshop on Modeling Consequences of Accidental Releases of Hazardous Materials, pp. 515-540, ISBN 0-8169-0781-1, American Institute of Chemical Engineers, Sept 1999.

Clutter, J.K., and Shyy, W., “Numerical Methods for Treating Disparate Scales in High-Speed Reacting Flows,” Numerical Heat Transfer, Part B: Fundamentals, Vol. 34, 1998, pp. 165-189.

Clutter, J.K., and Shyy, W., “Computation of High Speed Reacting Flow for Gun Propulsion Applications,” Numerical Heat Transfer, Part A: Applications, Vol. 31, 1997, pp. 355-374.

Clutter, J.K., “A Reduced Combustion Model for Vapor Cloud Explosions Validated Against Full-Scale Data,” Journal of Loss Prevention in the Process Industries, Vol. 14, Issue 3, Feb 2001, pp. 181-192.

Clutter, J.K., Mikolaitis, D.W., and Shyy, W., “Reaction Mechanism Requirements in on Shock-Induced Combustion Simulations,” Proceedings of the Combustion Institute, Vol. 28, pp. 663-669, Twenty-Eighth International Symposium On Combustion, University of Edinburgh, Scotland, July, 2000, ISSN 0082-0784.

Clutter, J.K., and Luckritz, R.T. “Comparison of a Reduced Explosion Model to Blast Curve and Experimental Data,” Journal of Hazardous Materials, Vol. 79, Oct 2000, pp. 41-61.

Clutter, J.K., and Luckritz, R.T. “Comparison of Blast Curve and a Reduced Explosion Model to Experimental Results,” International Conference and Workshop on Modeling Consequences of Accidental Releases of Hazardous Materials, pp. 515-540, ISBN 0-8169-0781-1, American Institute of Chemical Engineers, Sept 1999.

Clutter, J.K., and Shyy, W., “Numerical Methods for Treating Disparate Scales in High-Speed Reacting Flows,” Numerical Heat Transfer, Part B: Fundamentals, Vol. 34, 1998, pp. 165-189.

Clutter, J.K., and Shyy, W., “Computation of High Speed Reacting Flow for Gun Propulsion Applications,” Numerical Heat Transfer, Part A: Applications, Vol. 31, 1997, pp. 355-374.

Publications

AIAA Journal

AIChE Journal

Applied Ergonomics

IEEE Systems Journal

International Journal of Impact Engineering

International Journal of Protective Structures

Journal of Hazardous Materials

Journal of Loss Prevention in the Process Industries

Propellants, Explosives, Pyrotechnics

Safety Science

Shock Waves